CloudSense MCSG1
CloudSense is Pinmicro’s new series of beacon scanner which can directly connect with BeaconPlus cloud. CloudSense is using Bluetooth low energy technology scanner which can detect and collect information from surrounding beacons. This device is having communication capability built over WiFi 2.4GHz and Ethernet, which is used to transfer the collected information to the cloud. CloudSense have built-in storage capability to keep collected information.
  • Data Saved in TF Data Card or Udisk
  • Support AWS / Azure / Google lot Cloud
  • Input with DC 5.0V, 1A, Micro-USB
  • Firmware Upgraded by OTA
  • Support HTTP (SSL/TLS) / MQTT (SSL/TLS & Proxy) / TCP
  • Operating Temperature: -25°C to 65°C
  • Batch Configuration Tool Available

 

WIFI & ETHERNET

  • CPU 575MHz 32-bit Application Processor 2T2R 2.4 GHz with 300 Mbps PHY data rate,
  • 802.11b/g/n WiFi
  • 2 USB 2.0 Host Connectors and 1 TF Card Slot
  • 64 Mbyte 16-bit DDR2 RAM
  • 16 Mbyte SPI NOR Flash
  • RGB LED Strip as the Status Indicator
  • OpenWrt, Linux Distribution
  • for embedded Devices.
  • Support WiFi failover & Mult-Higher Level AP Configuration
  • 10/100 Ethernet with 802.3af PoE

 

BLUETOOTH LOW ENERGY

  • 64MHz 32-bit Processor
  • Built-in Power Amplifier Chip to Precisely Scan BLE
  • At Least Bluetooth 4.0 (Only for BLE)

 

Sample application #1

CloudSense is using Bluetooth low energy technology scanner which can detect and collect information from surrounding beacons.

Sample application #2

Property Value
General Information Color White
Size 150x150x36mm
Net Weight 180g
Accessory 1x USB cable, mental fixing and screws
Power supply (Vcc) DC 5.0 (+/- 5%) Max. 5.5 Volts
Storage temperature -40℃ to 85℃
Humidity Max 95%, non-condensing, relative humidity
WiFi RF Performance Wireless IEEE 802.11b/g/n (single stream)
Data rate IEEE 802.11b, 1-11Mbps
IEEE 802.11g, 6-54Mbps
IEEE 802.11n(2.4GHz), 7.2-72.2Mbps
Frequency band 2.400 – 2.484 GHz
Number of selectable Subchannels 14 channels
Maximum receive input level -10dBm (with PER < 8%@11Mbps)
-20dBm (with PER < 10%@54Mbps)
-20dBm (with PER < 10%@MCS7)
Minimum receive input level -87dBm (typ. with PER < 8%@11Mbps)
-70dBm (typ. with PER < 10%@54Mbps)
-70dBm (typ. with PER < 10%@MCS7)
Transmit Power 17dBm(typical)@802.11b
11.3dBm(typical)@802.11g
8.2dBm(typical)@802.11n
Range-up 90 meters (in open space)
BLE RF Performance Item Parameters
RF Power Accuracy +/- 4 dB
Receiver Sensibility -108dBm@250kbps, 0.1% BER
-93dBm@1Mbps, 0.1 %BER
Maximum Received Signal Strength at <0.1% PER 0dBm
Frequency Deviation +/-250 kHz @BLE
Scanning & concurrently process 300 BLE packets per second
Range up to 300 meters in open space
Ethernet 802.3af POE 10/100 mbps

 

Download Data Sheet

Access the data sheet by filling the below form